|
Material Types: |
|
PVC
POLYESTER |
|
Physical: |
|
|
Property |
POLYESTER |
PVC |
|
Thickness Tolerance: |
+/-
5% |
+/-
10% |
| Upper
Service Temp.: |
302° F. (150° C.) |
212° F. (100° C.) |
| Lower
Serivce Temp.: |
-94° F (-70° C.) |
-76° F. (-60° C.) |
| Melt
Point: |
491° F. (255° C.) |
302° F. (150° C.) |
| Water
Absorption: |
0.80% |
0.20% |
|
Ultimate Elongation: |
120% |
110% |
|
Tensile at Yield: |
170
Mpa. |
600
kg/cm |
|
Compression at 500 psi.: |
0.11% |
1.00% |
|
Density: |
1.39
g/cm3
|
0.91g/cm3 |
|
Ignition Temp.: |
752° F. (400° C.) |
572°F.(300° C.) |
|
Creep: |
0.90% |
4.00% |
|
Electrical: |
|
|
Property |
POLYESTER |
PVC |
|
Dielectric Strength: |
280
kV/mm |
400
V/mm |
|
Volume Resistivity: |
1x1013
cm |
1x1014
cm |
|
Surface Resistivity: |
1x1016
cm |
--- |
|
Chemical: |
|
|
Property |
POLYESTER |
PVC |
|
Acetic Acid: |
Suitable |
Suitable |
|
Hydrochloric Acid 10%: |
Suitable |
Suitable |
|
Sodium Hydroxide 10%: |
Suitable |
Suitable |
|
Water: |
Suitable |
Suitable |
|
Tricoethlene: |
Suitable |
Not
Suitable |
|
Detergent Oils 50°F. (10°C.) |
Suitable |
Suitable |
|
Detergent Oil 194°F. (90°C.) |
Not
Suitable |
Suitable |
| Other
Hydrocarbon Oils: |
Suitable |
Not
Suitable |
|
Ammonium Hydroxide:
|
Not
Suitable |
Not
Suitable |
|
Surface coloring on PVC may dissolve in solvents without deterioration to
the base material.
All materials should be tested for suitability for food and drink contact as
well as other performance requirements. |
|
|
The information stated here is based on technical data that PlasticFilms.Co
believes to be reliable. Any application should be thoroughly tested to
assure product reliability in every respect. PlasticFilms.Co assumes no
obligation or liability resulting the use of the information contained
herein and the user shall assume all risk and liability. |